A funny thing happened while my husband, Jason, and I were sitting on the couch last week watching Fixer Upper.
During a commercial, Jason starts flipping through the latest Ballard Designs catalog. He sees their shutter shelf for $259.00, looks at me and says, “We could totally make that out of those shutters in the garage.”
He gets all the heart eyes when he comes up with spontaneous projects like that.
So, we paused the show, head to the garage and got started on what would become our version of Ballard Design’s shutter shelf for only $7.00!
We had everything on hand except the industrial farmhouse style brackets to make the shelf. We couldn’t find anything like them in the store, so we made them ourselves for $1.00 per bracket. Click here or on the picture below for the DIY bracket tutorial.
(Affiliate links included for your crafting convenience.)
1/4″ plywood ripped down to 2″ strips or use lattice strips
1″x 6″ board for the shelves
Brad Nailer / Staple Gun and 1/2 ” staples
For the final paint finish, you’ll need:
White Primer, Annie Sloan Clear Wax, Mineral Spirits, Black Chalk Paint, Fine Grit Sandpaper, Buffing Cloth
We decide to go with 3 shutters instead of 4 because the proportions were better for an over-the-toilet-shelf.
The first thing we did was remove the hinges.
Next, we lined up the shutters and connected them together using wood glue, scrap 1/4″ plywood, a bar clamp, and staples using the pneumatic staple gun. On the top end of the shutters, we attached the plywood strip about 2″ from the edge. That’s the side that we’ll cut the arch.
On the bottom side, we stapled the strip along the edge.
We traced a curve along the top of the shutters.
Then we cut the arch using a jig saw.
Now, it’s ready for some paint, shelves, and brackets!
For the next step, we cut a 1 x 6 to make the shelves. I let my 11-year-old son get rid of some energy by giving the shelves a distressing with the hammer and a nail set. Have at it, Mason! Then, the shelves and shutters were given a couple coats of white primer.
My experimental side wanted to try making my own antiquing wax, so I mixed up a batch and used it on the shelves and shutters right over the primer.
I normally use Miss Mustard Seed’s antiquing wax, but I’ve run out. I prefer hers because it doesn’t give the paint a brown tint like Annie Sloan’s Antiquing Wax. This DIY antiquing wax is the closest I could come up with on my own but I may have to modify it a little to get the right consistency.
Tip: If you get too much antiquing wax on your project, you can remove some of it with clear wax, mineral spirits or sandpaper.
I’m smitten over our catalog copycat version for a few reasons…this is authentically vintage and the proportions are just right for over the toilet. Oh, and we saved $252 building it ourselves!
Click here to see how to make the decoupaged vintage apothecary jars.
Lots of projects are going on behind the scenes over at our 100-year-old bungalow. This Ballard Designs inspired shutter shelf is going in our master bathroom and it looks awesome with the shiplap walls!
Do you love catalog copycat projects as much as we do?
Check out the rest of my catalog inspired knock off projects here!
And be sure to come back tomorrow for the tutorial on the farmhouse style metal shelf brackets.
Update: Click here for the DIY bracket tutorial.